INHAG HP 1
Inflatable High-Pressure Tent for Extreme Weather Conditions
The INHAG HP 1 is an inflatable high-pressure tent designed for use in extreme weather conditions. Unlike the low-pressure systems in the PRZ series, the HP 1 uses seamless, EPDM-coated high-pressure round tubes (Ø 115 mm, 6–8 bar). The tubular supports do not obstruct the interior of the tent and do not require an automatic pressure regulation pump. If the structure deforms under extreme loads, it automatically returns to its original shape.
With a floor area of 4.00 x 6.00 m (24 m²), a ridge height of 3.30 m, and a certified wind load of 100–120 km/h and snow load of 20–40 kg/m², the HP 1 is designed for applications where PRZ systems reach their limits—alpine locations, winter operations, or permanently established field camps. Setup time: 10–20 minutes with 2–4 people.
The tarp material is available in three weight classes (250, 450, or 650 g/m²) — all flame-retardant, UV-resistant, and mold-resistant. The two-tone version is always gray on the inside and features the selected operational color on the outside.
technical details
| Length | 4,00 m |
| Width | 6,00 m |
| Side height | 2,05 m |
| Ridge height | 3,30 m |
| Floor area | 24,0 m² |
| Frame | EPDM high-pressure round beams, Ø 115 mm, 6–8 bar |
| Truss spacing | 2,00 m |
| Entrances | 1 on each gable end |
| Wind load | 100-120 km/h |
| Snow load | 20-40 kg/m² |
| Setup time | 10-20 min |
| Setup crew | 2-4 people |
| Weight | 60-250 kg (depending on tarp material) |
| Packed dimensions | 1.200 x 850 x 700 mm |
| Tarpaulin material Option 1 | 250 g/m², flame-retardant (FR), PU-coated, 500D PES |
| Tarpaulin material Option 2 | 450 g/m², flame-retardant (FR), PVC-coated, 1000D PES |
| Tarpaulin material Option 3 | 650 g/m², flame-retardant (FR), PVC-coated, 1000D PES, opaque |
| Standard colors | Red, olive green, desert colors, white |
Construction & Features
- High-pressure round beam, Ø 115 mm, made of EPDM-coated HT hose, pressure 6–8 bar
- No automatic pressure regulation pump required; seamless hoses
- Horizontal longitudinal beams at the roof ridge for structural reinforcement
- Tarpaulin material available in 3 options: 250 g/m² (PU/PES), 450 g/m², or 650 g/m² (PVC/PES)
- All zippers are HF-welded and waterproof
- Two-tone design: gray on the inside, exterior in the chosen color
- PVC floor covering 480 g/m², slip-resistant, flame-retardant, gray
- 1 entrance on each gable end (roll-up), 2 openings for heating hoses, 2 for cables
- Included: storm lines, tent pegs with hammer, repair kit, 2 panniers
Applications
- Operations under extreme weather conditions (wind, snow, temperature fluctuations)
- Alpine locations and winter operations with heavy snow loads
- Permanently established field camps for the German Armed Forces and international military forces
- Humanitarian missions in regions with challenging climates
- Operations for aid organizations with increased stability requirements