Special Project: Large Tents and Power Containers
Large tents and power containers for the Federal Office for Civil Protection and Disaster Assistance
technical details
| Length | 12,60 m |
| Width | 9,60 m |
| Ridge height | 6,40 m |
| Area | 120,00 m² |
| Weight | 850 kg |
| Packed size | 3 stanchion boxes (1545 x 1180 x 1200) for 1 tent section each |
| Number of entrances / emergency stops | 2 |
| Number of vehicle gates | 1 |
| Binding spacing | 2,20 m |
| Roof pitch | 17° + 22° |
| Air chambers | 3 |
The tent is assembled from three separate parts and connected using a zipper system.
Roof and wall materials:
The roof and walls are made of high-quality PVC fabric with a weight of 850 g/m². This special fabric is:
- Waterproof
- Rot-resistant (anti-fungal)
- Flame-retardant (DIN 4102 B1)
Each gable end has an entrance measuring approximately 1.20 m x 2.00 m. Each entrance can be rolled up using a zipper system. The vehicle door measures 4.50 m wide and 4.35 m high. The door can be rolled up from the ground using a cable system.
On each long side, there are 2 lockable openings for heating hoses and 2 openings for utility lines. The tent also features an opening for exhaust venting.
Frame materials:
The frame system consists of an inflatable support frame featuring three pneumatically separate air chamber systems. The support frame is equipped with two filling valves for inflating and deflating the air chambers and two pressure relief valves that prevent the air chambers from overinflating. The frame is made of 900 g/m² PVC fabric coated on both sides and is high-frequency welded.
Eyelets for hanging lamps, IV bags, etc., are attached to all longitudinal and cross beams of the frame.
Flooring material:
The floor is made of gray polyester fabric coated on both sides. It is flame-retardant in accordance with DIN 4102 B1 and is securely sewn to the tent fabric.
Summary of the tents’ extensive features:
- 9 inflation valves for compressed air and/or air blowers
- 6 quick-release vents
- 2 roll-up entrances
- 1 roll-up vehicle door
- 4 openings for heating hoses
- 4 openings for cables
- 2 openings for exhaust systems
- 1 PVC floor covering
- Suspension loops on the frame
- Complete set of guy lines
- Complete set of tent pegs with hammer
- Repair kit
- Packing bag for tent
- Packing bag for accessories