The inflatable tents of the type PZ differ from the type PRZ only in a different scaffolding version. The scaffolding of the PZ tents has a 1-chamber system, is made of a PVC material in the color gray and is high-frequency welded. The frame of the PRZ tents has a 2-chamber system, is made of neoprene rubber and is glued and sewn. The PZ tents are therefore cheaper than the PRZ tents and represent an economically interesting alternative to other inflatable versions. The PZ tents are a cheap, easy-to-use and solid design of inflatable tents. They are used for civil protection, emergency services and fire brigades as a rapid deployment for operations management, casualty collection point, medical center, weather protection and accommodation of people and equipment. The PZ tent can be inflated quickly and easily using both a blower and compressed air bottles.
Length | 3,80 m |
Width | 5,60 m |
Side height | 2,05 m |
Ridge height | 3,0 m |
Area | 20 m² |
Weight | 90 kg |
Pack size | 1100 x 900 x 700 mm |
Number of doors for the entrances | 2 |
Truss spacing | 3,8 |
Roof pitch | 22 |
Air Chambers | 1 |
Scaffolding design
The scaffold is an inflatable scaffold using a pneumatic air chamber system. The supporting structure is equipped with 2 filling valves for inflating and deflating the compressed air and 1 pressure relief valve, which prevents the air chambers from being filled excessively.
Framework material: PVC – high frequency welded, approx. 800 gr / qm, color gray.
In the area of the floor, fastening tabs for anchoring pegs are arranged at regular intervals on the long sides.
Eyelets for hanging lamps, infusion bottles etc. are attached to all longitudinal and cross members of the scaffold.
Tarpaulin design
The tarpaulin consists of high-quality polyester fabric (300 g / qm), which is coated with PVC. The special fabric is:
waterproof
anti-rot (anti-fungicide)
flame retardant (DIN 4102 B1)
There is an entrance of approx. 3.0 x 2.2 m on each gable end.
Each entrance can be rolled up and divided using a zipper system.
Two lockable bushings are arranged on each long side to accommodate cables and heating hoses. The tarpaulin can be produced in the following standard colors (similar to RAL) at no extra charge:
White (RAL 9010)
Beige (RAL 1001)
Gray (RAL 7045)
Red (RAL 3000)
Orange (RAL 2002)
Blue (RAL 5011)
Yellow (RAL 1021)
Floor finish
The floor is made of polyester fabric coated on both sides, in the color gray. It is flame retardant in accordance with DIN 4102 B1 and firmly sewn to the tent skin.
Standard Version Summary – Accessories
2 filling valves for compressed air and / or blower
2 quick vents / 1 pressure relief valve
2 roll-up and divisible entrances
2 bushings for heating hoses
2 cable glands
1 PVC flooring
Suspension loops on the scaffold
complete storm lines
complete pegs with hammer
Repair kit with hand pump
Pannier for tent
Pannier for accessories